The GREEN alternative to permanent densification
for polished concrete surfaces
Concrete Earth ECOGUARD Densifier & Hardener is a proprietary water base colloidal silicate solution, which is non-hazardous, contains zero VOC's, and creates a permanent integral barrier. ECOGUARD Densifier & Hardener offers all of the advantages of sodium, potassium, and lithium silicates, with a superior micro-cellular composition resulting in greatly increased depth penetration, interior densification, and surface abrasion resistance. Once applied, it demonstrates excellent resistance to moisture and stain penetration and promotes a high gloss due to the increased density of the treated concrete.
RECOMMENDED USE: ECOGUARD Densifier & Hardener is recommended to increase surface abrasion wear resistance and as an integral moisture vapor blocker for all polished concrete applications. It can be used for related decorative concrete applications as well, including micro-toppings, stamped and textured concrete, concrete counter tops, mortar, grout, and most any other Portland cement based surface.
- A deep penetrating micro-pore proprietary colloidal silicate
- Reacts with free alkali to form a 100% solids water insoluble gel
- Easy to apply by pump up sprayer
- Significantly increases concrete density
- Promotes a high gloss polished surface
- Excellent abrasion resistance
- Demonstrates excellent water and stain repellency
- Completely safe & environmentally friendly
LEED CREDIT CONSIDERATIONS: Materials and Resources: MR Credit 1.2-Building re-use. Indoor Environmental Quality: EQ Credits 4.2: Low emitting materials (VOC < 25 g/L). MR Credit 5.2: Regional materials-Greater than 20% extracted, processed and manufactured regionally at production location: Lemont IL 60439. 90% Content-Harvested within 500 miles.